OPTEVM Software
3.4 Launching the OPT300x/4xxxEVM Software
With the OPTEVM properly connected, launch the Latte OPTEVM GUI software from the Windows Start menu.
The software launches with a screen similar to that shown in
the EVM variant. This section describes the following devices.
Details on additional variants are covered in the following section though the software operation is the same for
each variant.
10
Light Sensor Evaluation Modules
Table 3-1. Section Supported Devices
Supported Devices
OPT4001EVM
OPT4001DTSEVM
OPT3005DTSEVM
OPT4048DTSEVM
OPT4001DNPQ1EVM
OPT4003DNPQ1EVM
OPT4060DTSEVM
Figure 3-11. OPTEVM Main Operation Screen
Copyright © 2024 Texas Instruments Incorporated
Figure
3-11. The exact GUI screen varies based on
SBOU293D – NOVEMBER 2022 – REVISED JANUARY 2024
www.ti.com
Submit Document Feedback