Wire Color Code Abbreviations; Battery Connection - MotorGuide Xi3-70 SW GPS Operation, Maintenance & Installation Manual

PRODUCT INSTALLATION, WIRING, AND BATTERY

Wire Color Code Abbreviations

BLK
BRN
GRN
PNK
RED
WHT
LT or LIT

Battery Connection

Before working around electrical system components, disconnect the battery
cables from the battery to prevent injury or damage to the electrical system
due to an accidental short circuit.
Disconnecting or connecting the battery cables in the incorrect order can
cause injury from electrical shock or can damage the electrical system.
Always disconnect the negative (‑) battery cable first and connect it last.
Failure to operate the trolling motor within the recommended voltage
specifications can cause product damage. Do not exceed the maximum
supply voltage.
IMPORTANT: Refer to the decal on the head of the trolling motor to determine
the voltage requirements of your trolling motor.
12-VOLT BATTERY CONNECTION
1. Install a 50‑amp (good) or 60‑amp (best) manual reset circuit breaker in
line with the trolling motor power cable positive (+) lead and the trolling
motor battery positive (+) terminal.
2. Connect the positive (+) trolling motor lead to the positive (+) trolling
motor battery terminal.
eng
INFORMATION
Wire Color Abbreviations
Black
Brown
Green
Pink
Red
White
Light
WARNING
!
CAUTION
!
NOTICE
13
BLU
GRY or GRA
ORN or ORG
PPL or PUR
TAN
YEL
DK or DRK
Blue
Gray
Orange
Purple
Tan
Yellow
Dark