MotorGuide Xi3-70 SW GPS Operation, Maintenance & Installation Manual page 16

PRODUCT INSTALLATION, WIRING, AND BATTERY
NOTE: If the trolling motor is being mounted to a carpeted boat deck, the
rubber isolators are not required.
a
b
c
d
e
f
a - Deck mounting bracket
b - Mounting bolt
c - Rubber isolator
d - Deck
e - Washer
f - Stainless steel nylock nut
g - Carpet
8. Align the trolling motor with the mounting holes in the deck. Hold the
mounting screws securely with a 7/16 in. wrench while using a wrench or
socket to tighten the nylock nuts on both sides of the deck mounting
bracket from under the deck.
INFORMATION
d
e
10
a
b
f
g
52406
eng