Table of Contents
Advertisement
NOTE:
G-PON /
Shows wavelength and power level of
XGS-PON
G-PON and XGS-PON
Dual
Press key to select operation mode:
Dual > G-PON > XGS-PON > Dual >...
Short press key to start measurement
Long press key to recall last results
Config
Press key to change TruePON settings
OLT-ID |
Shows OLT-ID of G-PON in ASCII code
G-PON
OLT-ID |
Shows OLT-ID of XGS-PON in HEX code
XGS-PON
G-PON
Press key to show G-PON details
XGS-PON
Press key to show XGS-PON details
Header
Selected PON type
OLT-ID
OLT-ID in ASCII or HEX code
Loss
Loss in dB or Pass/Fail
ODN-Class
ODN class as detected or Pass/Fail
Power
Power in dBm or Pass/Fail
Footer
AUTO/N1: ODN-Class (Auto or as set)
ONT: Location as set
NOTE: In the Settings menu Pass/Fail can be individually
enabled or disabled for Loss, ODN-Class, and Power.
OLP-39G/-39X TruePON Tester
TruePON mode
In this examples DUAL mode is selected.
XGS-PON and Dual mode are available in OLP-39X only.
Home screen
Showing PON values before starting the OLT-ID detection
TruePON overview
Showing detected OLT-IDs after pressing the start button.
TruePON details
Showing details of detected OLT-IDs.
4 D
ISPLAY OVERVIEW
T
PON
RUE
Fig. 3
P/F Off (top),
P/F ON (bottom)
MODE
17
Advertisement
Table of Contents
