Table of Contents
Advertisement
OLP-39G/-39X TruePON Tester
Selecting a Pass/Fail display mode
The OLP-39G/-39X provides two display modes:
• P/F On: Display of Pass/Fail results
• P/F Off: Display of absolute measurement results
Fig. 6
Display modes: P/F Off (left), P/F On (right)
To select a display mode:
1.
In the Home screen press [].
The Config dialog opens, P/F is selected.
2.
Press [] to select ON or OFF.
3.
Short press [MODE] key to close dialog.
Individual Pass-Fail-settings
Even if P/F is set to On, the Pass/Fail display for Loss, ODN-Class
and Power can be disabled.
For example:
You want Pass/Fail results for
Loss and Power, but want to
disable Pass/Fail indication
for the ODN class.
See
"Memory Management" on page 29
J
individual Pass/Fail settings.
6 T
PON
RUE
S
P
/F
ELECTING A
ASS
AIL DISPLAY MODE
how to change the
MODE
23
Advertisement
Table of Contents
