6 T
PON
RUE
MODE
S
ELECTING A LOCATION
24
Selecting a location
The Pass/Fail thresholds depend on the measurement location:
• ONT: This is a fixed setup of thresholds for the ONT
• Custom: This is a editable setup of thresholds.
To change the Custom settings, see
J
on page
29.
To select a location:
1.
In the Home screen press [].
The Config menu opens.
2.
Press [] or [] to select Location.
3.
Press [] to toggle between ONT and Custom.
4.
Press [MODE] to close the menu.
"Memory Management"
OLP-39G/-39X TruePON Tester