Registering Permit Fax No - Kyocera Triumph-Adler P-3527w Operation Manual

Fax Settings > Transmission Restriction

Registering Permit FAX No.

1
2
3
Reception • Register Reject FAX numbers.*
Rejection
Registering Reject FAX No. (page 8-13)
• Reception restriction settings are specified
in [Reject List] in Reception Restrictions.
Setting Reception Restriction (page 8-17)
* If there are no Reject FAX numbers registered, calls are only rejected from senders whose Local FAX
Numbers (Indicates local FAX information entries, not the actual line numbers.) are not registered.
NOTE
Up to 25 Permit FAX numbers can be registered.
Display the screen.
[System Menu/Counter] key > [FAX] > [TX/RX Restriction] > [Permit No. List]
Add a permit fax number.
1
Select [+].
System Menu/Counter.
TX/RX Restriction - Permit No. List
6764
Menu
2
Use the numeric keys to enter Permit FAX No. Up to 20 digits can be entered.
NOTE
Select [Pause] to insert a pause (-) between numbers.
Select [Space] to enter a space.
Use [<] or [>] to move the cursor.
Selecting [Backspace] deletes the character to the left of the cursor.
3
Select [OK].
To register another permit fax number, repeat Steps 2-1 to 2-3.
Prerequisites
10:10
1/1
End
8-11
Reception Rejection
Requirements
• The sender's Local FAX
Number is not registered.
• The sender's Local Fax
Number matches a Reject FAX
No. registered on the machine.