Table of Contents
Advertisement
1 Introduction
The network camera supports the network service for a sensor image with progressive scan, which
can be monitored on a real-time screen regardless of distances and locations. By using its
dedicated program, many users are able to have an access to the network camera at once or a
single user can monitor various network cameras at the same time. It also enables users to play,
store and retrieve a monitoring image by using a PC. All the settings and real-time monitoring
screens are also provided through an access to the web.
The network camera is fully featured for security surveillance and remote monitoring needs. It is
based on the DSP compression chip, and makes it available on the network as real-time, full frame
rate Motion JPEG, H.264 and H.265 video streams.
The alarm input and alarm output can be used to connect various third party devices, such as, door
sensors and alarm bells.
1.1 Components
This system comes with the following components;
* Dome Camera
* Installation Guide/CD
* Template Sheet
* Mounting Bracket
* Safety Lanyard
* Accessory Kit
1) Mounting screws (PH6 x 35.0)
2) Plastic anchors
3) O-Rings
* Accessory Connector
1) 2-Pin Terminal Block
2) 3-Pin Terminal Block
* RJ-45 Waterproof Cover
NOTE: Check your package to make sure that you received the complete system, including
all components listed above.
NOTE: Adaptor for 12VDC is not supplied.
1
1 (Optional)
1
1
1
1
(4)
(4)
(4)
1
(3)
(2)
1
6
Advertisement
Table of Contents
