Table of Contents
Advertisement
3.6 Network Camera Setup
This section describes how to configure the network camera.
Administrator has unrestricted access to all the Setup tools, whereas Operators have access to the
settings of Basic Configuration, which are Live View, Video & Image, Audio, Event, Dome
Configuration, and System.
You can configure the network camera by clicking Setup either in the first connection page or the
top second-right button of the Live View page. Accessing the network camera from a computer for
the first time opens the Admin Password dialog box. Enter your administrator or operator id and
password to get into setup page.
NOTE: If the password is lost, the network camera must be reset to the factory default settings.
Please see "Resetting to the factory default setting".
3.6.1 Basic Configuration
You can see the device information in this information page.
20
Advertisement
Table of Contents
