Table of Contents
Advertisement
• Tour Position Setup:
– Tour position: The Tour position can be selected in the range 1 ~ 64.
– Preset number: Show the selected Preset number.
– Dwell Time: Select the Dwell Time from 0 to 99 seconds. The default is 10 seconds.
– Speed: Adjust Pan/Tilt/Zoom Speed if you want to a slow movement. The defaults are
maximum Speed.
– Delete Position: If you want to remove Tour position from Tour Position Setup list, select the
desired Tour Position, and click the Delete Position button.
– Set Position: Click the Set Position button, then show the stored Presets on drop-down list.
Follow steps below to program the Tours:
1. Click the desired Tour position of Tour Position Setup list, and click Set Position button, then
show the saved Presets on drop-down list. Click a Preset.
2. Repeat step 1 for each desired position.
3. Click the Save button to save the settings, or click the Reset button to clear all of the
information you entered without saving it.
61
Advertisement
Table of Contents
