Introduction; Components - Eneo IPP-62A0012M0A User Manual

1/2.8” network dome, ptz, 12x , day&night, 1920x1080, 12/24v, poe, ip66
Hide thumbs Also See for IPP-62A0012M0A:
Table of Contents

Advertisement

1 Introduction

The network camera supports the network service for a sensor image with progressive scan, which
can be monitored on a real-time screen regardless of distances and locations. By using its
dedicated program, many users are able to have an access to the network camera at once or a
single user can monitor various network cameras at the same time. It also enables users to play,
store and retrieve a monitoring image by using a PC. All the settings and real-time monitoring
screens are also provided through an access to the web.
The network camera is fully featured for security surveillance and remote monitoring needs. It is
based on the DSP compression chip, and makes it available on the network as real-time, full frame
rate Motion JPEG and H.264 video streams.

1.1 Components

The camera is designed with compact, small size, hard dome camera housing. The housing is
constructed of aluminum, steel and plastic. The housing is designed to be mounted on a wall or a
ceiling. The housing meets the Protection Classification IP66 standards for dust and moisture
resistance.
* Dome Camera
* Installation Guide/CD
* Template Sheet
* Mounting Bracket
* Safety Lanyard
* Accessory Kit
1) Mounting screws (PH6 x 35.0)
2) Plastic anchors
3) O-Rings
4) Torx wrench
* Accessory Connector
1) 3-Pin Terminal Block
2) 6-Pin Terminal Block
* RJ-45 Waterproof Cover
6
1
1
1
1
1
1
(4)
(4)
(4)
(1)
1
(1)
(1)
1

Advertisement

Table of Contents
loading

Table of Contents