Table of Contents
Advertisement
– CIFS: A file format for a NAS device.
– NFS: A file format for a NAS device.
NOTE 1: Common Internet File System (CIFS) is a remote file access protocol that forms the
basis for Windows file sharing, network printing, and various other network services.
CIFS requires a large number of request/response transactions and its performance
degrades significantly over high-latency WAN links such as the Internet.
NOTE 2: Network File System (NFS) is a network file system protocol, allowing a user on a
client computer to access files over a network in a manner similar to how local storage
is accessed. NFS, like many other protocols, builds on the Open Network Computing
Remote Procedure Call (ONC RPC) system.
The CIFS screen displays as below.
– Address: Enter IP address for NAS device.
– Remote Directory: Enter directory or folder location to be recorded in the NAS device.
– Capacity: Enter the capacity of storage to be used. This must be less than the total storage
capacity.
– ID/Password: Enter ID and Password. The network camera will ask for these whenever you
access NAS device.
– Check: Press the Check button to check the validity of Device Setting data.
• Format: Click the Format button to format SD card.
• Device Remove: Click the Device Remove button before detaching SD card for data safety in
the SD card.
• Device Information: Show current SD card information.
When the settings are complete, click Save button to save the settings, or click Reset button to
clear all of the information you entered without saving it.
53
Advertisement
Table of Contents
