Table of Contents
Advertisement
• General: Enter the name for a new event map.
• Event In: Select an event type in the drop-down list.
• Event Out:
– E-mail: Select the email addresses you want to notify via email that an event has occurred.
– FTP: Select checkbox beside FTP to record and save images to an FTP server when an
event has occurred.
– Alarm out: Check this box to enable the alarm out.
– Audio Alert: Select an Audio Alert file as the Network Transmitter output when audio alert
event triggered. The Audio Alert file must first be configured on the Event In page.
– XML Notification: It sends XML messages to a Notification server that listens for these. The
destination server must first be configured on the Event In page.
– Boost: When an event has occurred, the camera will boost the Frame rate and Bit rate from
the normal condition to this boosted level for the duration of the event. Check the box to
enable the Function.
– PTZ preset: Select the preset position you want to move at event. If you want to move back
to home position after the event, which is pre-defined in the Alarm Out - PTZ Preset page,
check "Return to home position after event" box.
– Record: Record video stream when an event has occurred. The Record option must first be
configured on the Event Out page.
NOTE: This button disappears if you select AIHM as event in.
– Notification Server: It sends notification messages to the notification server that listens for
these. The destination server must first be configured on the Event In page. Enter a
message you want to send.
When the settings are complete, click OK button to save the settings, or click Cancel button to
clear all of the information you entered without saving it.
58
Advertisement
Table of Contents
