Table of Contents
Advertisement
▽ RTP
Create a setting for sending and receiving an audio or video on a real-time basis. These settings
are the IP address, port number, and Time-To-Live value (TTL) to use for the media stream(s) in
multicast H.264 format. Only certain IP addresses and port numbers should be used for multicast
streams.
• Port Range:
– Start port: 30000 ~ 39920: only even values are available.
• Multicast (Stream 1 / Stream 2 / Stream 3 / Stream 4 / Audio / Meta): This function is for
sending Video, Audio, and Meta Data to Multicast group.
– Multicast destination IP: Enter an IP between 224.0.0.0 and 239.255.255.255.
– RTP port: Enter a value between 1024 and 65530.
– RTP TTL: Enter a value between 1 and 255. If a network status is smooth, enter a lower
value. However, if a network status is poor, enter a higher value. When there are many
network cameras or users, a higher value may cause a heavy load to the network. Consult
with a network manager for detailed information.
77
Advertisement
Table of Contents
