Table of Contents
Advertisement
• SMTP (E-Mail) Test: User can check the SMTP setting via a sample email.
– Receiver: Enter an email address and click the Test button to test that the mail servers are
functioning and that the email address is valid.
When the settings are complete, click Save button to save the settings, or click Reset button to
clear all of the information you entered without saving it.
▽ FTP & JPEG
When the network camera detects an event, it can record and save images to an FTP server.
Images can be sent as e-mail attachments. Check the "Enable FTP" box to enable the service.
This camera can support multiple FTP servers and user can configure each server settings
separately.
• FTP Setting:
– Server: Enter the server's IP address or host name. Note that aDNS server must be
specified in the TCP/IP network settings if using a host name.
* Passive mode: Under normal circumstances the network camera simply requests the
target FTP server to open the data connection. Checking this box issues a PASV
command to the FTP server and establishes a passive FTP connection, whereby the
network camera actively initiates both the FTP control and data connections to the target
server. This is normally desirable if there is a firewall between the camera and the target
FTP server.
– Port: Enter the port number used by the FTP server. The default is 21.
– Remote directory: Specify the path to the directory where the uploaded images will be
stored. If this directory does not already exist on the FTP server, there will be an error
message when uploading.
– User name/Password: Provide your log-in information.
* Anonymous login: Check the box if you want to use anonymous login method and the
server supports it.
– Enable time folder: Create the folder in the FTP Server.
48
Advertisement
Table of Contents
