Table of Contents
Advertisement
▽ Record
When the network camera detects an event, it can record the video stream onto the Micro-SD
memory (not supplied) or NAS (Network Attached Device) as a storage device. Check the "Enable
Record" box to enable the service.
• Record Setting:
– Overwrite: Click checkbox to overwrite the storage device; Continuous Record is available
when not using an SD card.
– Stream Type: You can select Stream 1, Stream 2, Stream 3, or Stream 4.
* Stream 1, 3, 4: H.264 data
NOTE: Stream 2: MJPEG data cannot be recorded.
– Pre-event: Enter pre-event time value for the storage device pre-recording.
– Post-event: Enter post-event time value for the storage device pre-recording.
– Audio Record: Check the box if you want to record audio with video.
• Record Schedule: You can set the weekly recording schedule for each day. Drag or click area
by a box unit at first. Clicking the block toggles the recording between on and off. Click the All
Select button to set a schedule for the entire week or a whole day, respectively.
• Device Setting: Select the device type to be recorded in the drop-down list. The screen
changes according to selection.
– SD: Mounted SD card.
52
Advertisement
Table of Contents
