Table of Contents
Advertisement
▽ Boost
The Boost feature is used in conjunction with event detection. When this feature is turned ON, the
Frame rate and Bit rate in the boost condition can be set to a different value than the ones in the
normal condition field. When an event is detected, the camera will boost the Frame rate and Bit
rate from the normal condition to this boosted level for the duration of the event.
Check the box to enable the service.
• Boost Setting: You can set the condition in Normal and Boost mode.
– Boot Stream: Select a video stream for each condition in the drop-down list.
– Frame rate: Select a frame refresh rate per second for each condition in the drop-down list.
– Bit rate control: Select CBR or CVBR in the drop-down list in Normal Condition. You cannot
change it in Boost Condition.
– Bit rate: Select a value for each condition in the drop-down list.
When the settings are complete, click Save button to save the settings, or click Reset button to
clear all of the information you entered without saving it.
55
Advertisement
Table of Contents
