Table of Contents
Advertisement
USB AND SD CARD OPERATION (COMPUTER-LESS)
USB AND SD CARD AUDIO
For those that want to be able to playback their digitally store music library but don't want to bother
with a computer, USB and SD Card playback is a no fuss solution.
The USB and SD Card inputs include; USB 1 (Front), USB 2, 3 (Rear) and SD Card (Front).
Like PC Share, The DMS-500/550/600 must index the drive's library the first time it is selected.
Please note, this can take a while depending on the size of your drive.
SD Cards must be formatted to FAT, FAT32 or NTFS. It is also a good idea to set the
NOTE:
protection to lock for playback. DMS-500/550/600 supports SDHC 32GB & SDXC up to 2TB. If using
an SD Card to update the firmware, be sure the card is formatted to FAT or FAT32. exFAT can
sometimes be used. If you encounter a playback issue from SD or an updating error message using
SD, check the formatting and try another format.
Insert
USB hard disc drive, USB flash/thumb drive
1.
a
Once inserted a pop-up message say "The USB 2 Port is mounted", meaning the DMS-
500/550/600 has successfully connected to it.
2. Navigate to your preferred USB or SD Card source
pressing
.
Enter
3. Navigate to your selections by using the Up and Down keys. To expand the selection,
press
on the hand held remote
Enter or
>
4. Navigate to your desired music selection and
available to play all selections beneath it.
select
NOTE: You can also
Queue and Playlist section of the manual.
.
press
Add or Delete from the IR remote to
SD Card
or
into the desired port.
with the Up, Down keys
press
Play. You can also
create
a Queue or playlist.
and select it by
press
the Play All when
See
36
Advertisement
Table of Contents
