Prompted Wireless (Wi-Fi) Setup - Cary Audio Design DMS-600 Owner's Manual

NETWORK AUDIO OVERVIEW

PROMPTED WIRELESS (WI-FI) SETUP

This step assumes you have an active wireless home network and router installed in your home.
NOTE: The quality and stability of the audio signal depends on the bandwidth and range of your Wi-
Fi router. This is especially true for exceptionally high-resolution files, such as DSD files or PCM files
greater than 192kHz. When possible, a wired (Ethernet) connection is preferred.
1. Place the DMS-500/550/600 anywhere within the routers Wi-Fi range. Make sure BOTH Wi-Fi
antenna are connected.
Turn on
2. the DMS-500/550/600. Once on, press the Network Input Source on the IR remote.
The following prompt will display. To connect to Wi-Fi,
Select
3. your Wi-Fi network and
Press
press
Enter.
YES.
27