Cary Audio Design DMS-800 Quick Start Manual

First decide how you want to connect the DMS to your Router. Choose either Wi-Fi (two methods) or Ethernet, but
DO NOT connect both ways.
Audio Streamer 2.0 app,
in the background.
IF YOU ARE CONNECTING THE DMS WITH WI-FI,
WI-FI SETUP
1.
Screw the two Wi-Fi and Bluetooth antennas onto the rear of the DMS.
2. Place the DMS in its location and connect either the XLR or RCA
outputs to your preamp, integrated amp, or amplifier.
3. Connect the AC power cord and plug it into the AC outlet.
4. Wait 30 seconds and turn on the DMS. Allow it to fully boot up.
METHOD A – Wi-Fi setup using Cary Streamer 2.0 App.
1. Use the IR handheld remote to select "Connect to Wi-Fi with App" or wait 30 seconds for the DMS Hotspot to
automatically open. If this screen does not appear, press Network input on the IR remote.
2. Open your phone/tablet WIFI setup Menu and connect to DMS WiFi hotspot.
3. Once phone/tablet is connected to DMS WiFi hotspot, go back to the Cary Audio Streamer 2.0 app and select
Hotspot Setup. Continue, then select or enter your SSID (WiFi name) and WiFi password and select Connect.
Once DMS connects and displays the Network Settings Menu, select Done on the Cary Streamer 2.0 app.
BE SURE TO ALLOW LOCATION SERVICES AND FILE ACCESS WHEN APP
4. Although it is typically automatic, make sure your phone also reverts back to your home Wi-Fi network from the
setup DMS WiFi.
METHOD B – WiFi setup using IR remote control.
1. Using IR remote control, select "Connect to Wi-Fi with IR Remote." (If this screen does not appear, press
Network input on the IR remote).
2. A prompt will appear confirming you wish to search and setup a Wi-Fi Connection. Select YES.
DMS-650/700/800 QUICK START GUIDE
Delete all previous Cary streaming apps from your
but do not have it opened. Additionally, it must be completely closed out and not running
DO NOT CONNECT AN ETHERNET
PROMPTS.
phone/tablet. Download the Cary
CABLE.