Table of Contents
Advertisement
CONTROLS AND DISPLAYS
REAR PANEL
1. RIGHT CHANNEL ANALOG OUTPUT JACK (XLR BALANCED)
Use this jack for connecting to the preamplifier/amplifier's balanced XLR input jack.
2. RIGHT CHANNEL ANALOG OUTPUT JACK (RCA UNBALANCED)
Use this jack for connecting to the preamplifier/amplifier's RCA unbalanced input jack.
3. LEFT CHANNEL ANALOG OUTPUT JACK (RCA UNBALANCED)
Use this jack for connection to the preamplifier/amplifier's RCA unbalanced input jack.
4. LEFT CHANNEL ANALOG OUTPUT JACK (XLR BALANCED)
Use this jack for connecting to the preamplifier/amplifier's balanced XLR input jack.
5. DIGITAL OUTPUT JACK (TOSLINK)
16 – 24 Bit, 44.1 kHz – 192 kHz digital data output. MQA nor DSD files can be outputted.
6. DIGITAL OUTPUT JACK (COAXIAL)
16 – 24 Bit, 44.1 kHz - 192 kHz digital data output. MQA nor DSD files can be outputted.
7. USB 2 INPUT (TYPE-A)
For playback of music files from USB hard disc drives (HDD) and USB flash/thumb drives up
NOT FOR CONNECTING TO A COMPUTER.
to 3 TB.
8. USB 3 INPUT (TYPE-A)
For playback of music files from USB hard disc drives (HDD) and USB flash/thumb drives up
NOT FOR CONNECTING TO A COMPUTER.
to 3 TB.
9. ETHERNET RJ45 JACK
Connect to a network router for network music streaming of networked computer(s) or NAS
drive(s) via a wired Ethernet connection. Also used for network control via apps or control
system.
10. MINI USB FIRMWARE
For internal service use only.
15
Advertisement
Table of Contents
