Table of Contents
Advertisement
CONTROLS AND DISPLAYS
IR REMOTE CONTROL
This section explains how to use the remote control to set up and operate the DMS-500/550/600.
1. POWER: Use to turn the power on and off.
2. ALPHANUMERIC KEYs: Use for searching music library as
well as entering network settings, such as Wi-Fi security key,
etc.
3. ADD/DELETE: Press add or delete on music selections to
create or edit a song queue or playlist.
4. HOME: Press to return to the home screen of the source.
5. PLAY MODE: Press to switch between Play, Shuffle, Repeat,
and Repeat All.
6. NAVAGATION/PLAY HUB: Use the corresponding keys to
navigation up, down, right, left, and Enter for menus/lists
and to Play, Skip, Search, and Pause during music playback.
7. DISPLAY: Use to select the player displays various
brightness levels or turn the display off.
8. INPUT SOURCE SELECTOR: Use to select the desired
input source.
9. VOLUME -/+: Decrease or increase volume.
10. MUTE: Use to mute sound. Press again to resume sound.
11. QUEUE: Press to display the song queue for playback of
queue or to save a queue as a playlist.
12. MENU: Press to go to the Setting Menu of the DMS-
500/550/600. For DMS-550/600 only, Press and hold for 5
seconds to change the IR code set.
13. NOW PLAYING: Press to jumps to the now playing screen of the current source.
14. SRC: (Sample Rate Converter). Press to select one of the many PCM & DSD TruBit™ upsample-
rates. This can also convert any playing PCM signal to a DSD (Direct Stream Digital) signal. This
function does not work with MQA files as they are fixed at 16x, or 705.6 kHz
15. BT OUT: (DMS-600 Only). Press to send the audio from the DMS-600 to Bluetooth headphones
or Bluetooth speakers.
17
Advertisement
Table of Contents
