Network Renderer Streaming Audio Playback - Cary Audio Design DMS-600 Owner's Manual

Network audio players
Hide thumbs Also See for DMS-600:
Table of Contents

Advertisement

NETWORK AND INTERNET PLAYBACK OPERATION
5. Navigate to your desired music selection and
available to play all selections beneath it. Once playback is initiated, the Now Playing Screen will
display as follows.
NOTE: You can also
See Queue and Playlist section of the manual.

NETWORK RENDERER STREAMING AUDIO PLAYBACK

Using the DMS-500/550/600 as a Renderer is altogether different from the Client operation. This
function requires server software to be installed on your server computer(s) as described above, and
the use of a third party DLNA/UPnP app. The advantage for some is that they may prefer to use a
different app instead of our custom DMS-500/550/600 apps. For example, one may prefer JRiver's
JRemote or Gizmo, Bubble UPnP, Plug Player, 8Player, etc. The disadvantage is the third-party app
can only play network audio but cannot access all features of the DMS-500/550/600 so a
combination of a third-party app and IR remote must be used in conjunction. Renderer operations
is very simple as outlined below.
Turn on
1.
the DMS-500/550/600. It does NOT matter what inputs source the DMS-
500/550/600 are set to.
Open
2.
your preferred third party DLNA/UPnP.
Select
3.
"CARY DMS-500/550/600" from the available renderers within the third-party app and
initiate playback in accordance to the third-party app.
4. The Now Playing screen will display your selection. All music selections and playback can only
be controlled by the third-party app.
Another way to push music to the DMS-500/550/600 in renderer mode is with or from a computer.
To do so follow these steps;
Turn on
1.
the DMS-500/550/600. It does NOT matter what inputs source the DMS-
500/550/600 are set to.
Turn on
2.
your computer (Preferably Windows 7 or MAC OS X or latter) and open your preferred
media player software.
Right click on
3.
a music selection and
computer. See example below. Function may vary depending on media player software being
used.
select
Add or Delete from the IR remote to
Send to/Cast to
press
Play. You can also
create
Cary DMS-500/550/600 right from the
press
the Play All when
a Queue or playlist.
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dms-550Dms-500

Table of Contents