Wired (Ethernet) - Cary Audio Design DMS-600 Owner's Manual

NETWORK AUDIO OVERVIEW
Reset. Resets the DMS-500/550/600 to factory default.

WIRED (ETHERNET)

This step assumes you have an active home network and router installed in your home.
1. Place the DMS-500/550/600 within a cable run of your router or Ethernet port of which is wired
back to the router.
Connect
2. an Ethernet cable to the back of the DMS-500/550/600 and plug the other end into
your router, or Ethernet Port.
3. If connection isn't automatically established,
Network Settings.
Connect. If you prefer assigning a manual IP address,
number and IP address. However, DHCP is the most common method. If you encounter issues
connecting, try to reset network by
Press
Select
Wired and DHCP (for automatic configuration) and
selecting "RESET".
Menu on the IR remote and navigate to
select
Static and enter your Port
press
26