Cary Audio Design DMS-700 Quick Start Manual

First decide how you want to connect the DMS to your Router. Choose either Wi-Fi (two methods) or Ethernet, but
DO NOT connect both ways.
Cary Audio Streamer specifically for DMS-700,
out and not running in the background.
IF YOU ARE CONNECTING THE DMS WITH WI-FI,
WI-FI SETUP
1.
Screw the two Wi-Fi and Bluetooth antennas onto the rear of the DMS.
2. Place the DMS in its location and connect either the XLR or RCA
outputs to your preamp, integrated amp, or amplifier.
3. Connect the AC power cord and plug it into the AC outlet.
4. Wait 30 seconds and turn on the DMS. Allow it to fully boot up.
METHOD A – Wi-Fi setup using Cary Streamer App
1. Use the IR handheld remote to select "Connect to Wi-Fi with App" or wait 30 seconds for the DMS Hotspot to
automatically open. Make note of the password; 12345678. (If this screen does not appear, press Network
input on the IR remote).
2. Open your phone/tablet WIFI setup Menu and connect to DMS WiFi hotspot.
3. Once connected to DMS WiFi, open the Cary Audio Streamer app on your phone/tablet and follow the prompts
to "Setup a new DMS".
4. Once the DMS has successfully connected to your home Wi-Fi network, make sure your phone is also set back to
your home Wi-Fi network, and not DMS Wi-Fi.
METHOD B – WiFi setup using IR remote control
1. Using IR remote control, select "Connect to Wi-Fi with IR Remote." (If this screen does not appear, press
Network input on the IR remote).
2. A prompt will appear confirming you wish to search and setup a Wi-Fi Connection. Select YES.
DMS-700 QUICK START GUIDE
Delete all previous Cary streaming apps from your
but do not have it opened. Additionally, it must be completely closed
BE SURE TO ALLOW LOCATION SERVICES AND FILE ACCESS WHEN APP
DO NOT CONNECT AN ETHERNET
phone/tablet. Download the NEW
CABLE.
PROMPTS.