Table of Contents
Advertisement
SPECIFICATIONS
This section describes the basic specifications of the DMS-600 at the time of printing. Specifications
are subject to change without notice or obligation. When the following cautionary terms are used in
this manual, these definitions apply:
WARNING
•
Electrical hazard! Misuse or failure to follow instructions properly may
result in personal injury or death!
CAUTION
•
No risk or personal injury; however, misuse or failure to follow instructions
may result in damage to equipment.
NOTE
•
No risk of personal injury or equipment damage; however, misuse or failure
to follow instructions may prevent proper performance of the equipment.
DMS-600 BASIC SPECIFICATIONS
................................................................................................................................................
Master Clock Jitter
................................................................................................................................................
Digital Sampling Rates (Fs)
................................................................................................................................................
Digital Filter
................................................................................................................................................
Digital/Analog Converters
................................................................................................................................................
BLUETOOTH
...........................................................................................................................................
Analog Filter
................................................................................................................................................
Analog Outputs
................................................................................................................................................
Digital Outputs
................................................................................................................................................
Digital Inputs
................................................................................................................................................
Digital Input Sample Rate
................................................................................................................................................
Control
................................................................................................................................................
Communication
Below measurable levels
44.1 kHz to 768 kHz
32-Bit 8x Oversampling Digital Filter
2 - 2 channel AK4497EQ for working on true balanced
output
CSR Bluetooth v 4.0 with aptX® HD for 24 Bit / 48 kHz
high definition audio decoder
3
rd
Order Bessel
Balanced XLR, Single – Ended RCA
Coaxial, Toslink operating at Sample Frequency (Fs) from
44.1 kHz to 192 kHz, 16 bit to 24 bit
USB x 3, SD Card x 1
BLUETOOTH x1
AES/EBU x1, Coaxial x2, Toslink x1
USB operating at Sample Frequency (Fs) from 44.1 kHz to
384 kHz, 16 bit to 32 bit, DSD 64, 128, 256 and 512.
BLUETOOTH Sample Frequency (Fs) 48 kHz, 24 bit.
AES/EBU, Coaxial, Toslink operating at Sample Frequency
(Fs) from 44.1 kHz to 192 kHz, 16bit to 24 bit
Trigger input 12VDC x1
IR control x1
Ethernet RJ45 full remote configuration interface
Wi-Fi 802.11 b/g/n/ac support MU-MIMO
64
Advertisement
Table of Contents
