Table of Contents
Advertisement
USB FLASH/HDD AND SD CARD OPERATION
USB AND SD CARD AUDIO PLAYBACK
For those that want to be able to playback their digitally stored music library but don't want to
bother with a computer, USB and SD Card playback is a no fuss solution.
The USB and SD Card inputs include; USB 1 (Front), USB 2, 3 (Rear) and SD Card (Front).
Like PC SHARE/SMB, AiOS must index the drive's library the first time it is selected. Please note, this
can take a while depending on the size of your drive.
NOTE: SD Cards must be formatted to FAT, FAT32, exFAT or NTFS. It is also a good idea to set the
protection to lock for playback. AIOS supports SDHC 32GB & SDXC up to 2TB. If using an SD Card
to update the firmware, its best the card is formatted to FAT or FAT32. exFAT can sometimes be
used. If you encounter a playback issue from SD or an updating error message using SD, check the
formatting and try another format.
6. Insert an USB hard disc drive, USB flash/thumb drive or SD Card into the desired port.
Once inserted a message saying an USB or SD media has been mounted, meaning AiOS has
successfully connected to it.
7. Press the USB/SD/COAX/OPT button on the IR remote until USB/SD is displayed
8. After a few seconds, AiOS will display a list of all connected USB drives or SD Card.
s
9. Press the
key of the remote to move the > to your choice of USB Drive or SD Card and press
Enter. Please know the list of connected USB and SD Cards can be more than the two lines the
display is limited to. Just keep scrolling down to find the desired source and Press Enter.
32
Advertisement
Table of Contents
