Balanced Operation - Cary Audio Design DMS-600 Owner's Manual

BALANCED OPERATION

The pin assignments of ALL of the XLR-type male analog outputs, the XLR-type male digital
output and XLR-type female digital inputs are:
Pin 1: Signal ground
Pin 2: Signal + (non-inverting)
Pin 3: Signal - (inverting)
Connector ground lug: chassis ground
Refer to your amplifier's operating manual to verify that the XLR pin assignments of its input
connectors correspond to the DMS-500/550/600. If they are different, wire the XLR cable so
that the appropriate XLR output pin connects to the equivalent XLR input pin.
Pin 1: Signal ground
Pin 2: Signal + (non-inverting)
Pin 3: Signal - (inverting)
Connector ground lug: chassis ground
Refer to your digital input source signal player or other digital source's operating manual to
verify that the XLR pin assignments of its input connectors correspond to the DMS-
500/550/600. If they are different, wire the XLR cable so that the appropriate input pin
connects to the equivalent input pin.
Pin 1: Signal ground
Pin 2: Signal + (non-inverting)
Pin 3: Signal - (inverting)
Connector ground lug: chassis ground
Refer to your digital source's operating manual to verify that the XLR pin assignments of its
input connectors correspond to the DMS-500/550/600. If they are different, wire the XLR
cable so that the appropriate output pin connects to the equivalent output pin.
56