Setting Up Wired Ethernet Connection; Setup Wired Ethernet Connection - Cary Audio Design AiOS Owner's Manual

Lifestyle series all-in-one system

Hide thumbs Also See for AiOS:

Table of Contents

SETTING UP WIRED ETHERNET CONNECTION

HERE ARE SOME HELPFUL PLACES TO START IF YOU ARE NEW TO NETWORK AUDIO STREAMING.

WINDOWS

Getting Started with Media Streaming

http://windows.microsoft.com/en-us/windows7/getting-started-with-media-streaming

File Sharing Essentials

http://windows.microsoft.com/en-us/windows/file-sharing-essentials#1TC=windows-7

Enable File and Printer Sharing

http://windows.microsoft.com/en-us/windows-vista/enable-file-and-printer-sharing

APPLE

How to Connect with File Sharing on your MAC

https://support.apple.com/en-us/HT204445

The first step to enjoying AiOS' impressive features is connecting AiOS to your home network. This

step assumes you have an active home network and router installed in your home.

1. For Ethernet (wired) connection , place AiOS within a cable run to your router or to an Ethernet

port which is wired back to the router.

2. Connect an Ethernet cable to the back of AiOS and plug the other end into your router, or

Ethernet Port. AiOS should automatically connect to the network. If not follow these steps.

a. Press the MENU button on the IR remote .

b. Scroll down to "Network" and press Enter.

The following screen will display. Press the right

and press Enter. Once selected a ü will appear next to the selection. Press the right

and left

NOTE: Static IP addressing is typically only for advanced users to manually enter a user

specific IP address that is constant, hence the term static, meaning it does not change.

d. Follow the preceding on-screen instructions to connect to your network. When

complete, the display should say "Connected".

Keys once again to select DHCP (recommended) or Static, and press Enter.

, and left

Keys to select Ethernet

Table of Contents