Wired (Ethernet) - Cary Audio Design DMS-800PV Owner's Manual

WIRED (ETHERNET)

IF YOU ARE CONNECTING THE DMS WITH WIRED ETHERNET,
This step assumes you have an active home network and router installed in your home.
1. Place the DMS-800PV within a cable run of your router or Ethernet port of which is wired back to the router.
2. Connect an Ethernet cable to the back of the DMS-800PV and plug the other end into your router, or Ethernet Port.
3. If connection is not automatically established, Press Menu on the IR remote and navigate to Network Settings and
select Wired and DHCP (for automatic configuration) and press Connect. If you prefer assigning a manual IP
address, select Static and enter your Port number and IP address. However, DHCP is the most common method. If
you encounter issues connecting, try to reset network by selecting "RESET."
DO NOT CONNECT THE TWO WI-FI ANTENNAS.
30