Rear Panel - Cary Audio Design DMS-650 Owner's Manual

REAR PANEL

1. RIGHT CHANNEL ANALOG OUTPUT JACK (XLR BALANCED)
Use this jack for connecting to the preamplifier/amplifier's balanced XLR input jack.
2. RIGHT CHANNEL ANALOG OUTPUT JACK (RCA UNBALANCED)
Use this jack for connecting to the preamplifier/amplifier's RCA unbalanced input jack.
3. LEFT CHANNEL ANALOG OUTPUT JACK (RCA UNBALANCED)
Use this jack for connection to the preamplifier/amplifier's RCA unbalanced input jack.
4. LEFT CHANNEL ANALOG OUTPUT JACK (XLR BALANCED)
Use this jack for connecting to the preamplifier/amplifier's balanced XLR input jack.
5. DIGITAL OUTPUT JACK (TOSLINK)
16 – 24 Bit, 44.1 kHz – 192 kHz, DSD64 (DoP) digital data output.
(See SPDIF inputs & Outputs section below for more detailed information).
6. DIGITAL OUTPUT JACK (COAXIAL)
16 – 24 Bit, 44.1 kHz - 384 kHz, DSD64, DSD128 (DoP) digital data output.
(See SPDIF inputs & Outputs section below for more detailed information).
7. USB 2 INPUT (TYPE-A)
For playback of music files from USB hard disc drives (HDD) and USB flash/thumb drives up to 7 TB. Any drive you
have connected to it will function as a NAS Drive and will be accessible from a networked computer. NOT FOR
CONNECTING TO A COMPUTER.
8. USB 3 INPUT (TYPE-A)
For playback of music files from USB hard disc drives (HDD) and USB flash/thumb drives up to 7 TB. Any drive you
have connected to it will function as a NAS Drive and will be accessible from a networked computer. NOT FOR
CONNECTING TO A COMPUTER.
16