Rear Panel - Cary Audio Design AiOS Owner's Manual

CONTROLS AND DISPLAYS

REAR PANEL

1. RIGHT CHANNEL SPEAKER OUTPUT
Use these jacks for connecting to your RIGHT speakers positive (+) and negative (-) jacks.
2. LEFT CHANNEL SPEAKER OUTPUT
Use these jacks for connecting to your LEFT speakers positive (+) and negative (-) jacks.
3. LINE 1 ANALOG INPUT JACKS (STEREO RCA)
Use this jack for connecting to a stereo analog source.
4. LINE 2 ANALOG INPUT JACKS (STEREO RCA)
Use this jack for connecting to a stereo analog source.
5. LINE 3 ANALOG INPUT JACKS (STEREO 3.5mm jack)
Use this jack for connecting to a stereo analog source that uses a 3.5mm mini jack output,
such as phones and tablets, etc.
6. MAIN-IN INPUT
For connecting to the audio outputs of a processing source, such as an analog based
equalizer, room enhancer, etc. This creates a "loop" when used with the pre-outs. Refer to
the MAIN-IN function of this manual for further explanation.
7. PRE-OUT JACKS
For connecting to an external amplifier or distributed audio system. Refer to the PRE-OUT
function of this manual for further explanation.
8. SUBWOOFER OUTPUT
For connecting to an active /powered subwoofer. Refer to the SUBWOOFER OUTPUT
function of this manual for further explanation.
9. DIGITAL OUTPUT JACK (COAXIAL)
16 – 24 Bit, 44.1 kHz – 192 kHz digital data output. MQA nor DSD files can be outputted.
10. DIGITAL INPUT JACK (COAXIAL)
16 – 24 Bit, 44.1 kHz - 192 kHz digital data Input. MQA nor DSD files can be inputted.
11. DIGITAL INPUT JACK (OPTICAL)
16 – 24 Bit, 44.1 kHz - 192 kHz digital data Input. MQA nor DSD files can be inputted.
15