Advertisement
taken to avoid touching heating elements inside the oven.
33. The surfaces are liable to get hot during use.
Household use only
.INSTALLATION...
........................................................................
1. Remove the packaging and take out the distance limiter
from accessory in microwave oven (some models have been
installed already), unlock the power cord, according to the
specific shape of distance limiter, install by following the
given instruction. The purpose of the distance limiter is to
make the microwave oven to keep a certain distance from
the wall.
2. Take out all the packing. Carefully check whether there is
damage to the microwave oven. Such as:
a. the oven cavity is impacted or pressured.
b. the door is not flat; the switch is not smooth and flexible.
c. the metal Insulated mesh on the door is bended or
deformed.
d. the power cord is loose.
IF IT IS FOUND ABOVE, CONTACT YOUR NEAREST
SERVICE CENTER APPROVED.
3. Microwave ovens must be placed under dry and
non-corrosiveness environments, kept away from heat and
humidity, such as gas burner or water tank.
4. To ensure sufficient ventilation, the distance of the back of
microwave to the wall should be at least 10 cm, the side to
the wall should be at least 5 cm, the free distance above the
top surface at least 20 cm. the distance of the microwave to
6
Advertisement
