INVT Goodrive170-PV Series Operation Manual page 25

Goodrive170-PV Series Solar Pump Inverter
Function
code
Max. output
P00.03
frequency
Upper limit of
P00.04
frequency
Lower limit of
P00.05
frequency
Name
and fault reset commands.
0: Keypad (LOCAL/REMOT off)
The commands are controlled through
keypad keys, such as the RUN
STOP/RST keys. In running state, you can
press both RUN and STOP/RST to enable
the inverter to coast to stop.
1: Terminal (LOCAL/REMOT blinking)
The running commands are controlled
through forward rotation, reverse rotation,
forward jogging, and reverse jogging of
multi-function input terminals.
2: Communication (LOCAL/REMOT on)
The running commands are controlled by the
upper computer in communication mode.
Used to set the max. output frequency of the
inverter. Pay attention to this parameter
because it is the foundation of the frequency
setting and the speed of acceleration (ACC)
and deceleration (DEC).
Setting range: P00.04–400.00Hz
The upper limit of the running frequency is
the upper limit of the output frequency of the
inverter, which is lower than or equal to the
max. output frequency.
When the set frequency is higher than the
running
upper limit of the running frequency, the
upper limit of the running frequency is used
for running.
Setting range:
frequency)
The lower limit of the running frequency is
the lower limit of the output frequency of the
inverter.
running When the set frequency is lower than the
lower limit of the running frequency, the lower
limit of the running frequency is used for
running.
Description
P00.05–P00.03 (Max. output
-21-
Function parameter list
Default Modify
and
50.00Hz
50.00Hz
0.00Hz
◎
◎
◎