INVT Goodrive170-PV Series Operation Manual page 21

Goodrive170-PV Series Solar Pump Inverter
record parameters.
• It cannot be modified in running state and can be modified only in stopped state.
Example: Change the value of
4.3.2 Setting a password for the inverter
The inverter provides password protection function to users. Set P07.00 to gain the
password and the password protection becomes effective 1 minute later after retreating
from the function code editing state. Press PRG/ESC again to the function code editing
state, "0.0.0.0.0" will be displayed. Unless using the correct password, you cannot enter
it.
To disable the password protection function, you need only to set P07.00 to 0.
4.3.3 Viewing inverter status
The inverter provides group P17 for status viewing. You can enter group P17 for viewing.
P00.01
Figure 4-4 Modifying a parameter
All digits are
blinking.
The ones place is
blinking.
Note: When setting the value, you can press
Figure 4-5 Setting a password
PRG
ESC
PRG
ESC
All digits are blinking.
DATA
ENT
The ones place is blinking.
Note: When setting the value, you can press
Figure 4-6 Viewing a parameter
PRG
ESC
All digits are The ones place
PRG
ESC
blinking.
DATA
ENT
The ones place is blinking.
Note: When setting the value, you can press
from 0 to 1.
PRG
DATA
ESC
ENT
PRG
PRG
The ones place is
ESC
ESC
blinking.
DATA
ENT
»
and
SHIFT
The ones place is blinking.
DATA
ENT
PRG
ESC
The ones place is blinking.
»
and + to modify the value.
SHIFT
is blinking.
PRG
ESC
DATA
ENT
»
and +
SHIFT
-17-
Keypad operation guidelines
The ones place is
blinking.
DATA
PRG
ENT
ESC
+ to modify the value.
The ones place is blinking.
DATA
ENT
PRG
ESC
The ones place is blinking.
The ones place is blinking.
DATA
ENT
PRG
ESC
The ones place is blinking.
to modify the value.