Olympia ECR 465T-F Programming Instructions Manual page 53

ECR 465T-F/466T-F
2.System (Order groups) only Hospitality version 466T-F
The order-system can be activated in the programming-section of the ECR using the PRG – control key setting.
Programming-section (01) Department groups = ticket type 4
Programming-section (03) PLU = (column 14) Order-groups 10-9
If the Order group 00 is set it will not be printed.
This order-system enables printing with internal printer according to the set parameters possible. After opening a table
items such as food and beverages will automatically be sorted. Nine different order-groups can be determined within the
system.
The text for the order group (for example „BAR", „KITCHEN") can be programmed in the programming-section 41.
_____________Programming Instruction___________________________________
Type 4 all items with the order-group 10
************** BAR*****************
TRACK# 100
1 PLU 1
1 PLU 2
1 PLU 3
15-01-2008 2-10 000433 C01
Type 4 all items with the order group 20
************ KITCHEN **************
TRACK# 100
1 PLU 101
1 PLU 102
1 PLU 103
15-01-2008 2-10 000433 C01
Page
53