Table of Contents
Advertisement
ECR 465T-F/466T-F
5.20 Program PLU assign - „PLU Clerk Report" (SECTION 20)
PRG-Mode:
choice free code PLU
step operation
entry prg. value
end programming Section
Structure:
Record Num.
01-40 : PLU č.#
Note:
Setup refers to programming of any PLUs, the turnover of which shall be stored by individual Clerks (i.e. their
sales). They can be printed in X, Z- Report "Account Items for Clerks". Maximum number of PLU registered
in such manner may be 40
5.21 Program Terminal Number – IRC, PC (SECTION 21)
( RESERVET)
PRG-Mode:
entry prg. value
end programming Section
Structure:
Record Num.
01: NET ID CODE#
Note:
If you intend to communicate with the Cash Register via PC, or if it is linked in the IRC network, the Cash
Register must have a number. Then the Cash Register reports in the IRC network under this defined
number. Hence the number in the IRC network must be unique. The Cash Register name is automatically
allocated to the Cash Register number, see SECTION 33. After resetting the Cash Register, its number is
set to 00; i.e. this number should be used in SERD Manager in communication with Cash Register without
IRC network
_____________Programming Instruction___________________________________
[
]
(PLU No.#)
[
]
VALUE
Field
1: Free Code PLU (EAN)
[
]
[
VALUE
[
Field
1: Terminal number IRC / PC
using the cursor keys line-up, line-down
(by records)
[
[
]
Max. 13 numeric digit
Bon-sample
PRG
TERMINAL NUM. IRC
[ 01 ]
]
10.10.2004
]
01 – 16
Page
]
VALUE
01 - 01
VALUE
41
Advertisement
Table of Contents
