Olympia ECR 465T-F Programming Instructions Manual page 45

ECR 465T-F/466T-F
S-MODE
: Program Report Link Macro (SECTION 31)
S-mode
ECR 465T-F/466T-F
Macro key 1 "X" mode
Macro key 2 "X" mode
Macro key 1 "Z" mode
Macro key 2 "Z" mode
Up to 16 key sequences can be programmed per macro key in "X" or "Z" mode. (One line.)
If one line is insufficient, 32 key sequences can be use for one key in "X" or "Z" mode. (Two lines.)
Use the keys to move the cursor line by line.
Þ þ
Use the keys to move the cursor letter by letter.
[ ]
Use the key to delete a macro link.
[ ]
Use the key to save a line entered.
End programming by pressing
_____________Programming Instruction___________________________________
[# / ]
Display
31 Key Links 1,2 X/Z
[ X X X X X X X X X X X X X X X X ]
X X X X X X X X X X X X X X X X
X X X X X X X X X X X X X X X X
X X X X X X X X X X X X X X X X
[# ]
Page
45