Table of Contents
Advertisement
Waveform Characteristic
Sine
Flatness (when the Amplitude is 1.0
Vp-p (+4 dBm), relative to 100 kHz)
Harmonic Distortion (when the
Amplitude is 1.0 Vp-p)
Total Harmonic Distortion (when
the Amplitude is 1 Vp-p)
Phase Noise (when the Amplitude is
1 Vp-p)
Residue Clock Noise
Square
Rise/Fall Time
Jitter (rms)
Non-symmetry (below 50% Duty
Cycle)
Overshoot
Duty Cycle
Pulse
Pulse Width
Accuracy
Rising/Falling Edge Time
Overshoot
Jitter
Ramp
Linearity
Symmetry
Arbitrary
Waveform Length
Sample Rate
Amplitude Accuracy
Minimum Rise/Fall Time
Jitter (RMS)
Modulated Waveform
AM
Carrier Waveforms
Source
Internal Modulating Waveforms
9.Technical Specifications
<10 MHz: ±0.2 dB
10 MHz to 25 MHz: ±0.3 dB
25 MHz to 100 MHz: ±0.5 dB
100MHz to 150 MHz: ±1 dB
<-40 dBc
10 Hz to 20 kHz: <0.2 %
20 MHz: <10 kHz offset
-110 dBc/Hz (typical)
-57 dBm (typical)
<10ns (10%～90%) (typical, 1kHz, 1Vpp)
300ps + 100ppm of period (typical)
1% of period+ 5ns
< 2%
20% ~ 80% (to 25 MHz)
50% (> 25 MHz)
40 ns to 2000 s
1ns
20 ns to 500us
< 2%
300ps + 100ppm of the period
< 0.1% of peak output (typical, 1kHz, 1Vpp,
Symmetry 100%)
0% to 100%
2 ~ 1M points
200MSa/s
14 bits
35ns (typical)
6 ns + 30ppm
Sine
Internal/ External
Sine, Square, Ramp, White Noise, Arbitrary
43
Advertisement
Table of Contents
