To Set The Duty Cycle - Owon AG4101 User Manual

Current parameter
Parameter bar 1
Load
Amplitude
Offset
Parameter bar 2
Figure 5-3: The User Interface of Square Signal
Term Explanation
Duty Cycle:
The percentage that the High Level takes up the whole Period.

To Set the Duty Cycle

(1) Press F4 button, the "Duty" menu item is highlighted, the current value of the
Duty cycle is displayed in Parameter bar 1.
(2) Turn the knob to change the value directly;
or press the number keys to input the desired value, press F4 to choose "%".
For a frequency ≤25MHz, the Duty cycle range is 20%～80%. For a frequency greater
than 25MHz, the Duty cycle is 50%.
Parameter bar 1
Input box
Duty cycle
Figure 5-4: Set the Duty cycle of Square signal
5.Front Panel Operation
Frequency
Duty cycle
Duty cycle
Current parameter
13
Current signal
Setting menu of
Square signal