Precautions For Using The Touch Panel; How To Display The Keypad - Konica Minolta bizhub C659 Quick Start Manual

2

Precautions for using the Touch Panel

This machine features a capacitance-base touch panel. Note the following points when operating the Touch
Panel.
- Use your finger or the Stylus Pen supplied with this machine. Note that the Touch Panel will not re-
spond appropriately if you operate it using your nail or a pen tip instead of your finger or the Stylus Pen.
-
Applying a strong force to the Touch Panel will damages the Touch Panel, and potentially cause a
breakage.
- When operating the Touch Panel, do not press on it using excessive force or with a pointed object such
as a mechanical pencil.
-
Be careful not to operate Touch Panel with wet fingers. It may cause Touch Panel to be improperly
operated.
- If you operate the Touch Panel with a gloved finger, the Touch Panel will not respond normally. You
should operate it with a bare finger or using the Stylus Pen supplied with this machine.
-
Note that the Touch Panel may not respond normally if the distance between the user and fluorescent
light is 19-11/16 inches (500 mm) or less when you operate the Touch Panel.
- You must not use the Touch Panel near equipment that generates electrical noises such as an electric
generator or air conditioner. Otherwise a malfunction may be caused by an influence of electrical nois-
es.
2.6.4

How to display the Keypad

When tapping the input area on the copy screen and etc. for entering the number of copies or entering ad-
justment values, the Keypad will be displayed.
It can also be displayed by pressing the 10 Keypad key (default: Register key 3).
Input area for entering the number of copies
Input area for entering values
2-30
Touch Panel
bizhub C759/C659, AccurioPrint C759
2.6