Operation Flow; Checking The Cable Connection; Checking Network Settings Of This Machine - Konica Minolta bizhub C659 Quick Start Manual

3.2 Scan-to-Send function
5
Registering destinations
% Register destinations to which files are sent while checking the checklist. For details, refer to
page 3-21.

Operation flow

The following describes a transmission flow. For details, refer to page 3-23.
1
Loading the original
2
Selecting a destination
% Select a registered destination, and check the settings such as the file type and image quality.
3
Press the Start key.
% Press the Start key to scan the original.

Checking the cable connection

Check that a LAN cable is connected to the LAN port of this machine and the green LED is on.

Checking network settings of this machine

Tap [Utility], and select [Device Information]. Check that the IP address is displayed.
Tips
-
In general, the default settings are available for network connection; however, some network environ-
ments require a change on network settings.
- If no IP address is displayed, you need to set up the network. Tap [Utility], and select [Administrator
Settings] - [Network Settings] - [TCP/IP Settings]. Configure the required settings to suit your environ-
ment. For details, refer to the User's Guide CD.
bizhub C759/C659, AccurioPrint C759
3
3-17