3
Preparation flow
The following describes a preparation flow to send a fax from a computer. For details, refer to the relevant
page.
This preparation is not required the second time or subsequent times.
1
Checking the cable connection (Administrator)
% Check that this machine is correctly connected to the telephone line and network cable. For details,
refer to page 3-48.
2
Checking network settings of this machine (Administrator)
% Check the network settings of this machine. For details, refer to page 3-49.
You can use this function with the default settings unless otherwise requested.
3
Installing the fax driver on your computer
% Installing the fax driver on your computer For details, refer to page 3-50.
Operation flow
The following describes a flow to send a fax. For details, refer to page 3-52.
1
Creating data
% Create data to be sent using application software.
2
Configuring the fax driver
% Select a fax driver, and change the setting if necessary.
3
Entering a destination to send data
% Enter a destination to send data.
Checking the cable connection
1
Check that a modular cable is connected to the LINE port of this machine.
3-48
Fax function
bizhub C759/C659, AccurioPrint C759
3.3