Throttle Exp "Thexp - RadioLink TrackStar D-Spec TS4G Instruction Manual

4. Press "Enter"button, the adjusted value of the selected setup item stops blinking,
now the value of the selected setup item has been set.
5.Return to the initial screen by pressing "Exit" button twice.

Throttle EXP "THEXP"

This function makes the throttle high side and brake side direction servo operation
quicker or milder. It has no effect on the servo maximum operation amount.For the
high side, selection from among three kinds of curves (CRV/VTR/ EXP) is also
possible.
The curve can be divided into :Five dots throttle curve adjustment,Single point adjust-
ment.
Exponential curve adjustment,Braking index curve adjustment. To elevation point,
we can select(Exponential curve/Single point curve/Five points curve).
Curve point adjustment(select five points 1-5)
1.Press"Enter" button,The curve point value start flashing,then press"Dec(-)"and"Inc(+)"
button to adjust the starting value.
2.Press "Enter" button ,starting value stop flashing,adjustment is completed.
3.Press "Exit" button for two times,back to the initial interface.
Throttle curve adjustment
Adjustment method for CRV curve
Setup items
Mode: INT/ACT
TG.P: 20~80
RATE: -100~ 0 ~ +100
1. Enter the function menu and use " Dec(-) " or " Inc(+) " button to access THEXP
function.Select"FWD-CRV" function.
2. Press "Dec(-)" or "Inc(+)" button to select curve points 1~5 for curve point
adjustment that you want, from the graph you will clearly see the changes you have
made.
Adjustment method for VTR curve
Adjustment range
RATE: 0 ~+100
1.Enter the function menu and use "Dec(-)" or
"Inc(+)" button to access THEXP function. Select
14