Steering Speed "Stspd - RadioLink TrackStar D-Spec TS4G Instruction Manual

3. Press "Enter" button, the adjusted value of the rate stops blinking, now the value
of the rate has been set.
4.Return to the initial screen by pressing" Exit " button twice.
Note: the Vertical cursor shown in the figure moves in step with steering wheel
operation.

Steering Speed "STSPD"

Quick steering operation will cause momentary understeering, loss of speed, or
spinning.This function is effective in such cases.
Setup item
TURN:TURN direction
RETURN:RETURN direction
Adjustment range
1~100% (each direction)
At 100%, there is no delay
Steering servo delay
1.Access the function menu (By pressing "Exit" and "Enter" buttons simultaneously
and holding them down for one second ), press "Inc(+)" button four times to chose
STSPD function.
2.Press "Enter" button to get into STSPD function interface, press "Dec(-)" or
"Inc(+)" button to select setup item, then press "Enter" key and the initial value of
selected setup item will blink.
3.Use "Dec(-) " or "Inc(+)" button to adjust the value of the selected setup item.
(Note : In the interface of adjusting the value, return to the initial value "100" by
pressing "Dec(-) " and" Inc(+)" buttons simultaneously for about 1 second.)
13