RGBlink Q16pro-2 User Manual page 28

Device Connection
1. Click the device you need in the <All Devices>
list.
2. click in the <Chosen Device>.
Output Setting
Click any output port, the board where the port
locates is selected. Users can do settings to the port
now.
A red rectangle flashes around the chosen port
when it is clicked.
Standard Output Resolutions can be chosen as
shown in the right figure.
Customize Resolution
Q16pro supports to customize output resolutions.
Click any output port and type in Width,Height and
Refresh Rate.
Q16pro User Manual
28