RGBlink Q16pro-2 User Manual page 37

Layer Adjustment：
there are two ways to adjust layer.
1. Use the bar under the interface
Choose one layer and the bar shows its signal source,
type in position and size. click Set to confirm.
2. Layer Scale and Crop
Choose one layer needed to be adjusted,and type in its
position and size.
this icon means data related, when width is
changed, height will be changed as same proportion.
this icon means data not related, width and height
need to be filled respectively.
Layer Movement
Moving the mouse to drag the layer.
Layer Remove
Click the cross on the top right of the layer to remove the
layer if needed.
Q16pro User Manual
37