Table of Contents
Advertisement
Communication Settings
Click [Communication Settings] to do settings of IP and Serial Communication.
IP Settings: Display IP address of the device by default. You can turn off DHCP to manually set the IP address,
subnet mask and gateway. Then click [Save] on the right corner to save parameters.
Serial Communication:
COM Port: default COM port. If connected, it will show "Connection" .
Baud Rate: default data: 115200
Data Bits: 8
Stop Bits: 1
Parity: None
Fan Control
Click [Fan Control] to do settings of fan speed. Two modes are optional. The default mode is Auto-Adjustment
Mode. If you need to manually control the fan speed, please turn off the Auto-Adjustment Mode to adjust the fan
speed.
Q16pro
User Manual
9
Advertisement
Table of Contents
