Troubleshooting - U-Line TORK MATIC H-9952 Manual

Table of Contents

Advertisement

Available languages

Available languages

OPERATING ISSUE
Paper is not visible.
Sheet is not fully cutting
or very little sheet
showing.
If the problem persists or the troubleshooting section does not resolve or describe the
problem, contact Uline Customer Service at 1-800-295-5510.
PAGE 4 OF 12

TROUBLESHOOTING

RECOMMENDATIONS
The paper may not be properly loaded. Arrows are embossed
on the dispenser to show where the paper should be loaded.
Place paper between rollers. Push bar to feed through
mechanism.
Open cassette cover (place fingers on both sides of cassette,
locate raised tabs, pull cover towards you and down) and
check for paper jams. Clear any paper from path.
Open the dispenser and check the following components:
1. The large spring for the cylinder
2. The small spring on the paper break arm.
If either is worn or broken, call Uline Customer Service at
1-800-295-5510 to check the status of the warranty.
1-800-295-5510
uline.com
0122 IH-5805

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tork matic h-5805

Table of Contents