Comtrend Corporation CT-5372 User Manual page 45

Select Enable DHCP Server Relay (if required), and enter the DHCP Server IP
Address. This allows the router to relay the DHCP packets to the remote DHCP server.
The remote DHCP server will provide the IP address.
To configure a secondary IP address for the LAN port, click the box as shown below.
6. After entering your settings, select Next to display the following screen. The WAN
Setup-Summary screen presents the entire configuration summary. Click
Save/Reboot if the settings are correct. Click Back if you wish to modify the
settings.
7. The following screen will be displayed. To enable the wireless function, select the
box (by clicking on it) and input the SSID. Then, click Next.
The following screen will be displayed.
44